Report_Tata_Nutrisana - Indotech Asia

Report Validation Machine Fuji at PT Tata Nutrisana

Test Validation

Product running flow

Product No 4 (L95±3 x W25±3 x H21-22)

NO	Date Time	Product No	Total Product	Leak	Remark	Action
1.	10/08/22 Time : 15.00	Product no 4 (L95±3 x W25±3 x H21-22) + N2	40	0
2.	Time : 15.15		80	1	Body 6F
3.	Time : 15.30		72	0
4.	Time : 15.40		57	0
5.	Time : 15.55		300	1	Center seal 8
6.	Time : 16.05		300	1	T-seal crumb 2	Setting Center seal presure from Medium to Normal
7.	Time : 16.23		300	0
8.	Time : 16.48		300	0
9.	10/08/22 Time : 09.10		125	0
10.	Time : 09.25		320	3	Center seal crumb 4B Endseal crumb 1 Body 5B
11.	Time : 09.51		300	0
12.	Time : 10.15		320	2	T-seal 2 Crumb end seal 3
13.	Time : 10.44		300	0
14.	Time : 11.05		300	1	Crumb center seal 2
15.	Time : 11.35		300	0
16.	Time : 13.22		300	0
17.	Time : 14.15		300	0
18.	Time : 14.56		806	3	T-seal crumb 8F T-seal crumb 8F Endseal crumb 3B
19.	Time : 16.30		783	0

Product No 2 (L90±3 x W25±3 x H18-20)

NO	Date Time	Product No	Total Product	Leak	Remark	Action
1.	09/08/22 Time : 14.58	Product no 2 (L90±3 x W25±3 x H18-20) + N2	42	0
2.	Time : 15.02		67	1	Center Seal 6B
3.	Time : 15.11		70	0
4.	Time : 15.15		88	0
5.	Time : 15.21		300	1	Center seal Crumb 5B
6.	Time : 15.50		300	0		Setting Center seal presure from Strong to Normal
7.	Time : 16.11		300	0
8.	Time : 16.36		370	0
9.	10/08/22 Time : 10.45		930	5	Crumb 3 Body 6F T-seal 2 End seal folding 3 Endseal 2
10.	Time : 12.10		900	2	T-seal 8 Body 4F
11.	Time : 14.25		300	0

Product No 7 (L45±3 x W25±1 x H16±1)

NO	Date Time	Product No	Total Product	Leak	Remark	Action
1.	08/08/22 Time : 15.00	Product no 7 (L45±3 x W25±1 x H16±1) + N2	35	0
2.	Time : 15.10		47	0
3.	Time : 15.20		300	1	Body 5B
4.	Time : 15.48		273	2	Body 5B Boby 4F	Setting Film Pre-h from 100 to 97 Setting Gas Flow from 18 to 23
5.	Time : 16.16		213	1	Body 5B	Setting Gas Flow from 23 to 20
6.	Time : 16.35		300	0		Setting Film Pre-h from97 to 95
7.	Time : 17.02		300	0
8.	09/08/22 Time : 09.35		28	0
9.	Time : 09.41		300	0
10.	Time : 10.51		663	0
11.	Time : 11.53		933	2	Body 2 Endseal 9

Product No 8 (L45±3 x W25±1 x H21,5+1)

NO	Date Time	Product No	Total Product	Leak	Remark
1.	05/08/22 Time : 16.10	Product no 8 (L45±3 x W25±1 x H21.5 + 1) + N2	1	0
2.	Time : 16.14		38	0
3.	Time : 16.19		42	0
4.	Time : 16.25		71	0
5.	Time : 16.31		200	0
6.	Time : 16.46		375	0
7.	08/08/22 Time : 10.04	Product no 8 (L45±3 x W25±1 x H21.5 + 1) + N2	34	0
8.	Time : 10.08		72	0
9.	Time : 10.16		311	0
10.	Time : 10.30		300	1	Endseal Crumb 3 Product too wide 26.7mm
11.	Time : 10.57		300	0
12.	Time : 11.24		300	0
13.	Time : 11.50		300	0

Product No 6 (L45±3 x W25±1 x H11+1)

No	Date Time	Product No	Total Product	Leak	Remark	Action
1.	04/08/22 Time : 11.09	Product no 6 (L45±3 x W25±3 x H11-1) + N2	42	0
2.	Time : 11.48		53	0
3.	Time : 11.54		64	2	Crumb ID 9
4.	Time : 12.05		64	1	crack ID 7
5.	Time : 12.13		28	0		Setting End sealer position from 0 to 4 mm
6.	Time : 12.15		16	0
7.	Time : 12.25		49	0
8.	Time : 13.44		51	2	Body ID 6F
9.	Time : 14.00		42	0
10.	Time : 14.05		54	0
11.	Time : 14.17		133	0
12.	Time : 14.34		61	1	Folding
13.	Time : 14.43		250	3	Center seal ID6B Body ID2 Body ID6F
14.	Time : 15.31		300	2	Body ID4F	-.Setting Center back, front temperature from 205 to 203 Celsius -. Setting center seal pressure adjustment from Strong to medium
15.	Time : 15.55		230	1	Body ID4F	Setting End sealer position from 4 to 3 mm
16.	Time : 15.55					Setting End sealer position from 3 to 2 mm
17.	Time : 16.14		285	0
18.	Time : 16.32		138	1	End seal ID 3
19.	Time : 16.54		300	0		Setting End sealer position from 2 to 0 mm
20.	05/08/22 Time : 09.16		27	0
21.	Time : 09.21		300	0
22.	Time : 09.35		300	0
23.	Time : 09.50		300	0
24.	Time : 10.50		655	2	Body 6F & 8F
25.	Time : 11.22		362	0
26.	Time : 14.10		733	0

Product No 5 (L95±3 x W25±3 x H15-17)

No	Date Time	Product No	Total Product	Leak	Remark	Action
1.	02/08/22 Time : 14.03	Product no 5 (L95±3 x W25±3 x H15-17) + N2	132	0
2.	Time : 14.04		280	1	End seal 7
3.	Time : 14.40		320	0
4.	Time : 15.02		300	0
5.	Time : 15.34		300	1	Center seal 4B
6.	Time : 16.28		600	4	Body 6B 3x Center seal 6B Endseal 9	Cleaning center seal
7.	Time : 17.16		39	0		Setting presure center seal medium to Normal
8.	Time : 17.19		300	1	Center seal 9F
9.	03/08/22 Time : 14.08	Product no 5 (L95±3 x W25±3 x H15-17) + N2	38	0	Center seal 4B
10.	Time : 14.12		337	1	Center seal 4B
11.	Time : 14.27		18	2	Center seal 4B
12.	Time : 14.33		42	0
13.	Time : 14.38		333	1	T-seal crumb jam id 2
14.	Time : 15.22		300	0
15.	Time : 15.42		300	0
16.	Time :16.01		300	0
17.	Time :16.41		950	0

Product No 3 (L90±3 x W25±3 x H21-22)

No	Date Time	Product No	Total Product	Leak	Remark	Action
1.	01/8/22 Time : 11 : 34	Product no 3 (L90±3 x W25±3 x H21-22)	28	0
2.	Time : 11 : 38		39	0
3.	Time : 11 : 57	Product no 3 (L90±3 x W25±3 x H21-22) +N2	300	1	T seal ID 2
4.	Time : 13 : 50		188	1	Center Seal ID 6B	Setting End Sealer Eccentric speed from 100.0 % to 101.0 %
5.	Time : 14 : 08		48	0		setting guide roller center seal from 4.5mm to 4mm
6.	Time : 14 : 14		300	0
7.	Time : 14 : 30		289	2	T seal, ID 8
8.	Time : 14: 50		35	0		Setting End seal position from -3.9 to 0.0
9.	Time : 15: 00		300	0
10.	Time : 15: 22		300	0
11.	Time : 15: 40		300	1	Body ID 4F
12.	Time : 16: 10		300	1	Center seal ID 2
13.	Time : 16: 37		300	1	Center seal ID 4B	Cleaning center seal, Setting guide roller center seal from 4mm to 3.8mm
14.	Time : 16: 58		300	0
15.	Time : 17: 25		300	0
16.	Time : 17: 48		300	0

Product No 1 (L90±3 x W25±3 x H18-20)

No	Date	Product No	Total Product	Leak	Remark	Action
1.	25/7/22	Product no 1 (L90±3 x W25±3 x H18-20)	780	12
2.			80	0
3.			20	1
4.			80	1
5.			80	0
6.			80	0
7.			63	0
8.			566	1
9.	26/7/22	Product no 1 (L90±3 x W25±3 x H18-20)	43	0
10.			40	0
11.			552	4
12.			618	9
13.			200	0
14.			134	2
15.			200	0		Setting Transfer brush 54mm to 55mm Forming brush 59mm to 58 Before endseal brush 8,5mm to 9,5mm Endseal heigh 9mm to 10mm
16.			148	0
17.			342	0
18.			329	0
19.			127	2
20.			430	0		Setting Product Position
21.	27/7/22	Product no 1 (L90±3 x W25±3 x H18-20)	61	0
22.			337	0
23.			354	1	T-seal ( Crumb jam )
24.			348	1	T-seal ( Crumb jam )
25.			376	1	Body
26.			444	2	Body
27.			393	0
28.			384	0
29.			440	1	Body
30.			411	5	2 ( Body ), 2 ( Body + T seal ), 1 ( Folding )
31.			376	2	T-seal ( Crumb jam ), Body
32.			357	1	Body
33.			107	3	2 ( Body ), 1 ( Jam )
34.			29	0		Setting End seal position 5.0 mm to 7.0 mm
35.			392	2	Center seal
36.			388	1	Body
37.			364	2	1 (Body), 1 ( Crumb at Endseal )
38.	28/7/22	Product no 1 (L90±3 x W25±3 x H18-20)	40	0		Setting Endseal position from 7.0 mm to 1.0 mm
39.			351	1	Body
40.			34	0
41.			300	2	1 ( Body ), 1 ( Center seal )
42.			300	3	1 ( Body ), 1 ( Center seal ), 1 ( Crumb at Endseal )
43.			291	1	T Seal	Setting Endseal heigh 10 mm to 11 mm
44.			300	1	Center seal
45.			300	4	2 ( Body ), 2 (Center Seal )	Setting End seal position from 1.0 mm to 0.0 mm
46.			41	1	1 (Center seal )	Setting Endseal heigh 11 mm to 10 mm
47.			242	1	1 ( Center seal )	Setting guide roller center seal
48.			300	1	Body	Change center pressurization from Strong to Medium
49.			42	0		Setting bag former ( Front & Back ) from 7mm to 6mm
50.			300	1	Crumb
51.			300	1	Body
52.			42	0		Setting film Pre-H from 100 to 95
53.			300	1	Center seal
54.	29/7/22	Product no 1 (L90±3 x W25±3 x H18-20) + N2	69	1	Body
55.			40	0		Setting bag former ( Front & Back ) from 7mm to 6mm Setting pushing sponge from No. 4 to No. 2
56.	Time : 09 : 46		300	0
57.	Time : 09 : 57		300	0
58.	Time : 10 : 20		300	1	Body ID 6F
59.	Time : 11 : 04		321	0
60.	Time : 11 : 28		328	0
61.	Time : 13 : 21		343	1	Crumb ID 8
62.	Time : 14 : 00		650	0
63.	Time : 14 : 51		685	3	1 Body ID 6F 2 Folded ID 3B	Setting presure N2 from 25 to 30
64.	Time : 15 : 36		724	2	1 Body ID 4B 1 Folded ID 3B
65.	Time : 16 : 25		685	0		Setting presure N2 from 30 to 23
66	Time : 17 : 15		593	2	1 Body ID 6F 1 Body ID 6B